Heat Pump Radiators
Heat Pump Radiators
Heat pumps are most efficient with radiators that have a low flow temperature. If the existing radiators in the existing building are not suitable for operation with the heat pump, they can be replaced with modern heat pump radiators. These are also called low-temperature radiators or low-temperature radiators because they are ideally designed to work with a heat pump. They can replace conventional radiators or radiators and achieve high levels of efficiency and very good heat distribution in the room thanks to small fans with low flow temperatures.
Heat pump radiators require lower flow temperatures, usually below 40 degrees Celsius, and can achieve high performance with low energy consumption.
This high performance is made possible in the Dimplex WPHK heat pump radiators by ultra-fast copper-aluminum high-performance heat exchangers for low flow temperatures and maximum heat output.
Heat pump radiators can be recognized by their relatively large and flat heating surfaces. Thanks to their large surface area, they distribute heat evenly and quickly throughout the room, and the high proportion of radiant heat further increases efficiency.
The plus: in addition to energy-efficient heating, heat pump radiators can also provide silent cooling, provided the heat pump is reversible.
Heating in a slim, modern design.
Heat pump radiators WPHK series.
Dimplex offers two variants: classic horizontal orientation (WPHK) or space-saving vertical and also suitable for wet rooms or bathrooms (WPHKV).
- Optimum comfort thanks to quick heat/cold in all corners of the room: With the reversible fans on all sides of the radiator, it is possible to distribute heat and cold evenly
- perfect heating of the room over the entire height of the device - vertical compartment grids on the left and right and punched intake openings at the top and bottom - integrated fans for better heat exchange
- two dynamic high-performance heat exchangers for high performance at low flow temperatures. 9 x faster heating than standard radiators.
- 10% to 30% energy savings thanks to integrated axial fans compared to underfloor heating or standard radiators
- Fully automatic operation using flow temperature detection
- Hydraulic and electrical connection possible in the housing. Hydraulic connection on the left or right. Heating water throughput via standard thermostatic valves/heads.
- High heat output, efficient (silent) cooling and ventilation through axial fans. Blow-out direction reversible.
Speed levels stored to increase performance up to 3 times.
- Sound-decoupled fan unit optimized to the length of the heat pump radiator (25% quieter compared to conventional fan coil units with radial fans)
- Vertical design with low overall depth for heating and silent cooling
- Completely pre-assembled with compartment grilles on the side and suction and exhaust openings at the top and bottom
- Heating, cooling and ventilation operating modes can be individually adjusted
- Two dynamic high-performance heat exchangers for low flow temperatures and maximum heat output
- Including fans for a higher air outlet temperature and ultra-fast shielding of cold radiation
- Operation and adjustment of the radiator via 3 buttons that can be mounted variably
- Optimum comfort thanks to quick heat/cold in all corners of the room: With the reversible fans on all sides of the radiator, it is possible to distribute heat and cold evenly
- perfect heating of the room over the entire height of the device - vertical compartment grids on the left and right and punched intake openings at the top and bottom - integrated fans for better heat exchange
- two dynamic high-performance heat exchangers for high performance at low flow temperatures. 9 x faster heating than standard radiators.
- 10% to 30% energy savings thanks to integrated axial fans compared to underfloor heating or standard radiators
- Fully automatic operation using flow temperature detection